Two settings are available in the Port Number Settings area: Server Listen Ports and Default URL Ports. Set the hostname or IP address for a Network Time Protocol (NTP) server with which you wish your B Series Appliance to synchronize. For more information about OpenDNS, visit Allow your B Series Appliance to respond to pings if you wish to be able to test if the host is functioning. In the event that these local DNS servers are unavailable, the Fallback to OpenDNS Servers option enables the B Series Appliance to use publicly available DNS servers from OpenDNS. Any statically configured DNS servers listed in the Custom DNS Servers field are attempted to be reached first, followed by DNS servers received from DHCP. If DHCP is enabled, the DHCP lease provides you with a default gateway as well as a listing of DNS servers in order of preference. Enter an IP address for one or more DNS servers. In this case, the configured hostname might have to match the reverse-DNS lookup of the B Series Appliance's IP address.Īssign a default gateway, selecting which ethernet port to use. This is useful if the SMTP Relay Server specified at /appliance > Security > Email Configuration is locked down. It is also used as the local server identifier when making SMTP connections to send email alerts. If the hostname attempted by the client software needs to change, notify BeyondTrust Technical Support of the needed changes so that Support can build a software update.) The Hostname field exists primarily to help you distinguish between multiple B Series Appliances. (To make these changes, see /login > Status > Information > Client Software Is Built to Attempt. It does not affect what hostname client software or remote users connect to. The Hostname field does not need to meet any technical requirements. Under the Global Network Configuration section, configure the hostname for your BeyondTrust Appliance B Series. To learn more about DHCP, please see Dynamic Host Configuration Protocol (DHCP).Ĭlick Show Details to view and verify transmission and reception statistics for each ethernet port on the B Series Appliance. In this case, when checked, an IP address is obtained from the DHCP server and is removed from the pool of available IP addresses. This reduces the need to manually configure settings. DHCP is a network protocol that uses a DHCP server to control the distribution of network parameters, such as IP addresses, allowing systems to automatically request these parameters. If you wish to configure redundant NICs on the same subnet, us e NIC teaming.īy default, Dynamic Host Configuration Protocol (DHCP) is enabled for your B Series Appliance. These switches drop all packets received from eth1 since this NIC does not have the default gateway and is not present in the static ARP table of the gateway. Some switches are configured with static ARP. When eth0 receives these packets from the switch destined for eth1, eth0 drops the packets. Switches configured with dynamic ARP send packets randomly to either eth0 (192.168.1.5) or eth1 (192.168.1.10), not both. Given this configuration, traffic from both NICs are sent to the default gateway (192.168.1.1) regardless of which NIC received traffic.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |